Your Wavlink AC1200 extender can be configured with a router in the most effective manner using this method. To begin, you will need to ensure that the WPS button is supported by your wireless router. Please read the following directions carefully in order to obtain lateral information. 

To begin, insert the power plug that comes with the Wavlink extender into a power socket. Following this, the indicator LED of the Wavlink extender device will begin to solidly blink after having previously been steady. Now, press and hold the WPS button located on the back of the router for six seconds to proceed further with the Wavlink AC1200 setup process. The next step is to wait two minutes and then press the WPS button on the interior of the Wavlink extender. Following that, the WPS LED will begin to pulsate in a solid blue pattern on both of the devices. If you see this message, pressing the WPS button on both the extender and the router resulted in a successful connection between the two devices. 

If the WPS LED is not solidly blinking, then this indicates that your router and extender are not situated in close proximity to one another. To fix the problem, position the extender correctly. You will be able to resolve the issue.